At a Glance

  • Designed for charging automotive batteries fitted in cars, bikes and light commercial vehicles.
  • Easy to read LED display
  • (IP65) Suitable for all types of 6V & 12V lead acid and gel batteries

Features:

The AA Car Battery Charger & Maintainer is controlled by a 12-bit AD microprocessor with 4-stage charging characteristics designed for charging automotive batteries fitted in cars, bikes and light commercial vehicles.

The inbuilt microprocessor senses the condition of the battery and controls the regulator to provide the right current and voltage to suit the charging characteristic of the battery. This will provide the best type of charging and give the longest battery life.

Functions include:

  • Intelligent in-built microprocessor
  • Easy to read LED display
  • Reverse polarity protection
  • Short circuit protection
  • Charger memory
  • Water and dust resistant
  • (IP65) Suitable for all types of 6V & 12V lead acid and gel batteries

Technical Details:

  • Voltage / current input: 220V - 240V, 21W
  • Current output: 1.0A - 1.2A DC (1.5A RMS)
  • Output voltage: 6V or 12V
  • Type of battery: All types of lead acid batteries including wet acid, sealed, AGM, leisure type or gel batteries
  • Mains cable length: 2m
  • Charging cables length: 1.5m
  • Accessories: 1 x pair of crocodile clamps with 1.0m lead / 1 x pair of eyelet connections with 1.0m lead
  • Weight: 725g
  • Insulation rating: IP65

Charge time (bulk charge up to 80%):

  • 20 AH battery = time to charge is 20 hours
  • 50 AH battery = time to charge 50 hours
  • 100 AH battery = time to charge 100 hours

Stages of Battery Charge:

Soft Start:

The unit will take an initial battery test to determine the battery condition. If the battery is severely discharged the charger will begin the 'soft start' stage. Charging starts with reduced current until battery voltage reaches a normal condition for charge.

Bulk:

This is the major charging stage where the battery receives the majority of its charge. During this stage the battery is brought to 75 - 80% of its charge. The maintainer will deliver the maximum current until the terminal voltage has risen to the full charge level for a normal battery.

Absorption:

Completes the charge up to almost 100%. The charge rate falls to its minimum output while the voltage is maintained.

Float:

This is maintenance charging at constant voltage. Float mode keeps the battery at 100% charge. Normal charging mode is time-limited (max 10 days) while float mode charging will maintain indefinitely without damaging the battery.

 

Warranty:

In the unlikely event that you have a problem with your purchase please look at our terms and conditions which sets out how you to make a return under warranty.

Legal Disclaimer:

We are not the manufacturer of the products sold on this site. Actual product packaging and materials may contain more and different information than what is shown on our website. We recommend that you do not rely solely on the information presented on our website. Please always read labels, warnings, and directions provided with the product before using or consuming the product. Please see our full terms and conditions

Write a review

Please login or register to review

The AA - Battery Charger and Maintainer - Smart Charger

ID: 31235
  • £39.15
  • £29.44

Checking Stock Status

At a glance

At a Glance

  • Designed for charging automotive batteries fitted in cars, bikes and light commercial vehicles.
  • Easy to read LED display
  • (IP65) Suitable for all types of 6V & 12V lead acid and gel batteries




Sign up to our newsletter!
placeholder+image